GE VMIACC-5595 / ACC-7055RC Series Installation ManuaHandling and Installation
The VMIACC‐7055 / ACC‐7055RC rear transition modules (RTMs) are designed to be used with the VMICPCI‐7055 / CPCI‐7055RC single board computers (SBCs). The rear transition module is mounted in the rear I/O area of the chassis.
It provides associated signals from the front-mounted SBC. The signals are routed to the backplane through the J3 and J5 connectors. The J4 connector is used for alignment only and has no electrical connections.
The VMIACC‐7055/ACC‐7055RC boards are full 6U form factor boards with a CompactFlash connector, an internal IDE header, two COM ports, two LAN ports (option dependent), and one PIM site.
Installation of the Rear Transition Module
The rear transition module installs in the rear I/O portion of the CompactPCI chassis using the J4 connector as a guide. Installation of the VMIACC‐7055/ ACC‐7055RC is shown in Figure 1‐2 on page 8.
