Overview
This chapter describes external field termination panels you can use with digital input modules.
Digital input termination panels are available in these configurations:
• 16-point commoned
• 32-point commoned
• Non-commoned
• Basic
• Bypass
16-Point Commoned Digital Input Term Panels
This section describes 16-point commoned digital input terminal panels. Model numbers of these
term panels are:
•9561-810 (115 V, commoned, 16 pts.)
•9562-810 (48 V, commoned, 16 pts.)
•9563-810 (24 V, commoned, 16 pts.)
•9563-910 (24 V, commoned, resistor protected, 16 pts.)
This figure represents a typical 16-point commoned digital input termination panel with fuses and blown-fuse indicators.
This figure represents a typical 16-point commoned digital input termination panel with resistors.
9561-810 (115 V, commoned, 16 pts.)
Termination panel 9561–810 is compatible with 115-volt digital input modules and has 16 input points and commoned power terminals (PWR+ and PWR–). Each input point is protected by a fuse with a blown-fuse indicator.
The modules compatible with 9561–810 have 32 points, which means you must use two terminal panels for each digital input module.
9562-810 (48 V, commoned, 16 pts.)
Termination panel 9562–810 is compatible with 48 volt digital input modules and has 16 input points and commoned power terminals (PWR+ and PWR–). Each input point is protected by a
fuse with a blown-fuse indicator. The modules compatible with 9562–810 have 32 points, which means you must use two term panels for each digital input module.
32-Point Commoned Digital Input Term Panels
This section describes 32-point commoned digital input terminal panels, which are available with fuses and blown fuse indicators or resistors for field device protection. Model numbers of these
term panels are:
•9565-810 (48 VDC, commoned, 32 pts.)
•9566-710 (24 VDC, commoned, 32 pts.)
•9566-810 (24 VDC, commoned, 32 pts.)
16-Point Non-Commoned Digital Input Term Panels
This section describes non-commoned digital input term panels. Model numbers of these term
panels are:
•9561-110 (115 V, non-commoned, 16 pts.)
Basic Digital Input Term Panels
This section describes basic digital input terminal panels, which are available in 16-point and 32-
point configurations.
Model numbers of these term panels are:
•9551-110 (115 V, basic, 16 pts.)
•9552-610 (48 V, basic, 16 pts.)
•9553-610 (24 V, basic, 16/32 pts.)
•9750-310 (24 VDC, basic, 32 pts.)
•9750-410 (48 VDC, basic, 32 pts.)
CAUTION
With the 3515 pulse totalizer input module, sensor pulse outputs should be the push-pull type. You may use high-side or low-side, solid-state output, but maximum frequency may be reduced based on cable distance. Do not use mechanical relay/switch contacts. To prevent point-to-point cross-talk, use individually shielded, twisted-pair wire for lengths greater than 50 feet (15 meters).
Bypass Term Panels
This section describes bypass term panels, which are available for 32-point and 64-point digital input modules.
Model numbers of these term panels are:
•BP9228-010 (24 V, bypass, 32 pts., for 32 pt. modules)
•BP9229-010 (24 V, bypass, 32 pts., for 64-pt. modules)
