MD00R-02/04 - Industrial PLC Workstation

2 or 4 line x 20 Character LCD

Backlit LCD Display

128K Internal EPROM

The MD00R-02 and MD00R-04 fulfill the need for a powerful yet cost effective operator interface system

in areas where space and cost must be small. Displays are available with either two or four lines in a

backlit LCD. Each line can contain up to 20 characters. Each page can contain up to 32 lines, which can

be accessed by scrolling with the arrow keys. Brightness control is provided to adjust the display for easy

viewing under nearly any condition.
Display Variables

PLC internal variables can be shown on any of the many display pages (limited only by memory size). The number of variables that can be viewed at one time is limited only by the display size. UniOP also  provides scaling (linear conversion) of the displayed data. The final value can then be shown in several useful formats including decimal, bit, hexadecimal, floating point, and string. Data entry with valid range verification is also available for each data type.

Data Entry

The integral keypad on the MD00R-02 and the MD00R-04 offer 4 function keys and 4 user LEDs, as well as four arrow keys, a CLEAR key and an ENTER key. The arrow keys can be used to increment or decrement any data field. Slide-in legends make it easy to customize and document the operation of the function keys.

Security
An eight-level password protection scheme protects critical system features from undesired access.
Alarm

The MD00R-02 and MD00R-04 can monitor and display up to 256 alarms. Attributes and unique messages for each alarm can be defined. Operator acknowledgment can also be required.
Adaptability
Custom display screens are developed using the UniOP Designer™ for Windows™ programming software. Your completed project file can be downloaded to the display through the serial port and permanently stored in Flash EPROM.
Keyboard Macro Edito

A feature that allows you to configure your UniOP Keys to do a variety of functions locally in the UniOP.For example: turning pages, setting attributes, setting LEDs, writting to the PLC and many more. This can save many hours of ladder logic programming.
MD00R-02/04 Feature

NEMA 4/12 compliant enclosure CE approved

Keyboard Macro Editor

One RS-232 / RS-422 / RS-485 / 20mA current loop serial port, speeds up to 38,400 baud for direct PLC connection

One auxiliary port for high speed bus network communications

4 configurable function keys with LEDs and slide in legends

128 KB internal memory standard Flash EPROM

Unlimited number of variables per page

256 prioritized alarms

Eight-level password protection

Cursor, Help, Clear, and Enter keys

Displays ASCII standard character set

Uniopek-04 6za983-7 h/w v.33b8s/w v.5.65nfw32 panel

UNIOP CP01R-04 00A5 KEYPAD HMI DISPLAY 30VDC

UNIOP ETOP ETOP20B-0050 Touch Panel Programmable/Programmable/Programmable/Programmable HMI

UNIOP eTOP 315Touch Panel ETOP315U201 HMI TFT color display screen usb ethernet

UNIOP eTOP32 | 6ZA1015-7 | Operator Panel

Uniop etop 307 Touchscreen 7 Zoll

UNIOP ETOP05EB-DF45 -- ETOP 05EB DF45

UniOP epad06 LCD Monitor epad 06