English
简体中文
News
Get to know our latest news
Eaton XV-303-15-C00-A00-1B 15.6”Integrated HMI-PLC - Dual Ethernet Capacitive Multi-Touch Industrial Display
Source: | Author:kongjiang | Published time: 2026-07-14 | 44 Views | 🔊 Click to read aloud ❚❚ ▶ | Share:
Eaton XV-303-15-C00-A00-1B 15.6”Integrated HMI-PLC - Dual Ethernet Capacitive Multi-Touch Industrial Display

Eaton Official Product Article: XV-303-15-C00-A00-1B Advanced 15.6” HMI-PLC Multi-Touch Display

1. Product Overview

The Eaton XV-303-15-C00-A00-1B belongs to the premium XV300 series front-mount HMI-PLC units, a high-performance all-in-one industrial operator panel integrating visualization and native PLC control logic in a single streamlined hardware unit. Designed for large-scale machine, process, energy, and marine automation systems, this 15.6-inch widescreen model delivers tablet-grade capacitive multi-touch operation paired with industrial-grade durability, comprehensive fieldbus interfaces, and embedded Linux real-time operating system.
As the C00 interface variant, this unit is equipped with two independent 10/100 Mbps Ethernet ports, alongside RS-232, RS-485 and CAN communication, supporting isolated network segmentation between enterprise SCADA layers and field control buses to boost system cybersecurity. The A00 designation stands for standard front panel mounting hardware compatible with cabinet sheet thickness 2–5 mm, fully compliant with IP65 front panel protection rating against dust, water splash, and workshop contaminants.
This model combines powerful 800 MHz ARM Cortex-A9 processing, a large high-definition TFT display, and native CoDeSys PLC runtime, eliminating the need for separate standalone PLC hardware to cut cabinet footprint, wiring cost, and overall system integration complexity. It is fully documented under Eaton manual MN048031EN, with complete mechanical dimensions, wiring, and commissioning guidelines for machine builders and system integrators.

2. Core Model Code Definition (Official Naming Rule)

Breakdown of XV-303-15-C00-A00-1B per Eaton catalog specification:

  • XV: XV300 HMI-PLC product family

  • 303: Front panel mounting construction (XV-313 = rear wall mount counterpart)

  • 15: 15.6-inch widescreen TFT display

  • C00: Dual Ethernet base interface configuration (B00 = single Ethernet)

  • A00: Standard front mounting bracket kit for 2–5 mm cabinet steel plates

  • 1B: Software license bundle: GALILEO visualization runtime + integrated XSoft-CoDeSys PLC control function

3. Key Product Features

3.1 Industrial PCT Capacitive Multi-Touch Interface

  • Projected Capacitive Touch (PCT) multi-touch technology supporting multi-finger gesture control (zoom, scroll, swipe) identical to consumer tablet operationorigin-log...

  • Heavy-duty anti-glare tempered glass front surface, stain-resistant and easy to wipe clean with standard industrial cloths without scratching

  • Supports landscape and vertical portrait installation modes with adjustable backlight brightness to reduce TFT ghosting/image retention

  • 400 cd/m² uniform LED backlight with rated 50,000-hour service life at 25°C ambient temperature

3.2 15.6” High-Definition Widescreen Display

  • 1366 × 768 WXGA native resolution, 16.9 industrial widescreen aspect ratio

  • 16.7 million true-color 24-bit TFT panel, contrast ratio up to 500:1 for clear readability in bright factory lighting

  • Optimized for large-format process visualization, trend curve monitoring, multi-machine synchronous control, and central plant HMI rooms

3.3 Powerful Embedded Hardware Platform

  • CPU: 800 MHz ARM Cortex-A9 high-performance graphics processor

  • Memory allocation: 512 MB system RAM + 1 GB SLC industrial flash storage + 128 kB non-volatile retain memory for PLC process data backup

  • External expandable storage: Standard SD/SDHC card slot on device side for project backup, firmware upgrade, and recipe data storage

  • Fanless natural convection passive cooling system – zero moving parts, eliminates fan failure risks and maintenance cycles.

  • Embedded industrial Linux OS optimized for stable long-cycle continuous operation without regular reboots

3.4 Full Multi-Communication Interfaces (C00 Dual Ethernet Spec)

All hardware ports are integrated on the rear service panel as defined in the official drawing:

  1. Dual RJ45 10/100 Mbps Ethernet (LAN1 + LAN2): Separate network zones for IT supervisory connection and OT field control bus; support Modbus TCP, EtherNet/IP, EtherCAT

  2. USB 2.0 Host (Type A, 500 mA power output): Connect printers, barcode scanners, USB data sticks, and external touch peripherals

  3. USB 2.0 Device (Type B): PC programming download for GALILEO and CoDeSys projects

  4. RS-232 9-pin SUB-D COM1: Serial communication with legacy PLCs, barcode readers, and printing devices

  5. RS-485 9-pin SUB-D COM2: Modbus RTU, multi-drop field device networking up to 1200m cable length

  6. CAN 9-pin SUB-D CAN1: Native CANopen and J1939 marine/vehicle bus protocol support

  7. All serial/CAN ports adopt shielded SUB-D connectors with UNC locking nuts to resist vibration loosening in heavy machinery environments.

3.5 Built-In HMI + PLC All-In-One Function

  • Pre-installed GALILEO visualization runtime license for graphical HMI screen design, alarm logging, trend recording, and recipe management

  • Integrated XSoft-CoDeSys 3 PLC runtime complying with the IEC 61131-3 international standard for programming.

  • Eliminates separate PLC CPU, reduces cabinet wiring, and shortens project commissioning time

  • Compatible with the Eaton XN300 slice modular I/O system for flexible digital/analog signal expansion

3.6 Rugged Mechanical & Environmental Design

  • Front protection grade IP65 / NEMA 4X / NEMA 12; rear service side IP20 for cabinet internal installation

  • Operating temperature range: 0°C to +50°C; max 45°C when installed at ±45° vertical tilt

  • Storage & transport temperature: -20°C ~ +60°C, non-condensing humidity 10–95% RH

  • Vibration & shock certified per IEC/EN 60068 industrial standard for machine mounting.

  • Full ATEX 3D Ex tc IIIC T70°C certification for Zone 22 dust hazardous locations

  • DNV GL marine type approval compliant for shipboard control cabin deployment (with recommended XT-FIL power noise filter)

4. Complete Official Technical Specifications

Electrical Power

  • Rated supply: 24 VDC SELV/PELV safety extra low voltage

  • Allowable input range: 19.2 V (min) ~ 30.0 V (max), transient tolerance up to 31.2 V

  • Max power consumption: 21.6 W, max input current ≤0.9 A at 24 VDC

  • Built-in reverse polarity protection and internal non-serviceable fuse

  • Functional earth terminal required: ≥1.5 mm² copper wire, max 350mm cable length for EMC noise suppression

Mechanical Dimensions (XV-303-15 Front Mount)

  • Overall size: 401.7 mm (W) × 254.9 mm (H) × 67.6 mm (Depth without connectors)

  • Net weight: 3.25 kg

  • Required cabinet cutout dimension: 387 mm (width) × 238.5 mm (height) ±1mm tolerance

  • Mounting bracket set included for 2–5 mm thick control cabinet panels, crisscross torque tightening sequence ≤0.1 Nm to maintain front IP65 sealing.

Global Certifications & Approvals

  • CE (2014/30 EMC, 2014/34 ATEX dust protection)

  • cUL UL 61010-2-201 industrial control safety listing

  • DNV GL marine ship classification certificate TAA00000NC

  • RoHS 2011/65 EU environmental compliance

  • IEC/EN 61131-3 PLC programming standard, IEC/EN 60529 enclosure rating

5. Typical Industrial Application Scenarios

  1. Heavy Machinery: Large packaging lines, metal processing equipment, plastic injection molding, central control panels

  2. Process Industry: Water & wastewater treatment plants, chemical mixing stations, food & beverage production lines

  3. Energy Sector: Hydraulic power stations, solar/wind farm local monitoring, boiler and thermal automation systems

  4. Marine & Offshore: Ship engine room control consoles, cargo vessel monitoring (with DNV GL filter accessory)

  5. Factory Central HMI Room: Multi-unit production line centralized supervision with dual Ethernet network isolation

  6. Hazardous Dust Zones: Grain processing, woodworking, powder coating, ATEX Zone 22 equipment control

6. Software Ecosystem Compatibility

  1. GALILEO Visualization Software: Design HMI screens, alarm management, historical trend logging, and user access permission control

  2. XSoft-CoDeSys 3: IEC standard PLC programming for logic, motion control, PID regulation, and bus communication configuration

  3. Supported Fieldbus Protocols: Modbus TCP/RTU, CANopen, J1939, EtherNet/IP, EtherCAT, serial printer communication

  4. Data Export: SD card recipe/alarm log export, USB offline data backup, Ethernet remote SCADA data transmission

7. Standard Package Contents (Factory Original Kit)

1 × XV-303-15-C00-A00-1B 15.6” HMI-PLC main unit
1 × MSTB 2.5/3-ST-5.08 24VDC power terminal plug
12 × M4 mounting set screws + front sealing rubber gasket for IP65 protection
Printed hardware installation manual IL048022ZU

Complete Eaton MN048031EN multi-touch display operation manual download access via the Eaton official resource center.


EATON CORPORATION VMV13L3TWR1/UN V1 / VMV13L3TWR1UNV 1 (BRAND NEW)

EATON CORPORATION 531AW00280A / 531AW00280A (BRAND NEW)

EATON CORPORATION R9N3600FJ / R9N3600FJ (BRAND NEW)

EATON NZMH3-AEF300-N A MOLDED CASE CIRCUIT BREAKER 3 POLE 300A 600VAC NEW IN BOX

EATON NZMH3-AEF300-N A MOLDED CASE CIRCUIT BREAKER 3 POLE 300A 600VAC NEW IN BOX

EATON CORPORATION EPC37740FDB 2 / EPC37740FDB2 (BRAND NEW)

EATON CORPORATION ETH620 / ETH620 (BRAND NEW)

EATON ECN1834CAG NSNP

ND312T35W - Eaton - Molded Case Circuit Breaker Brand New With New Amp Plug

E2NM3800WA06S1 0 - Eaton / Cutler Hammer - Seller Reconditioned