CX5130 | Embedded controller with Intel Atom® E3827
The CX5130 is equipped with an Intel Atom® multi-core processor with a clock frequency of 1.75 GHz. In this way, real multi-core technology can be applied to the embedded controller series. The hardware interfaces of this series are the same as those of the existing CX5000 series in installation direction and implementation. It provides two independent Gigabit Ethernet ports, four USB 2.0 interfaces, and a DVI-I interface. A variety of other interface options or gateway functions can be provided through optional interfaces (which can be installed before leaving the factory) and I/O layers (which can be composed of E-bus or K-bus terminal modules).
CX5130 has the characteristics of low power consumption and fanless design.
Product overview
The CX5100 product family comprises three Embedded PCs, which differ in terms of processor type, RAM, and housing size. The CX51x0 Embedded PC is a full-fledged PC with the following basic configuration:
• CFast card slot,
• MicroSD card slot,
• two independent Gigabit Ethernet interfaces,
• four USB 2.0 interfaces,
• and a DVI-I interface.
Suitable operating systems are Microsoft Windows 10 IoT Enterprise LTSB, Microsoft Windows EmbeddedStandard 7 P, or Microsoft Windows Embedded Compact 7.
The Embedded PC features an internal 1-second UPS as persistent data memory. In the event of a power failure, the 1-second UPS can store up to 1 MB of persistent data on the CFast card or MicroSD card.
The Embedded PC can be ordered ex-factory with an optional interface. The optional interface cannot be retrofitted.
Table 2: Available optional interfaces for the CX51x0
CX51x0-xxxx Optional interfaces
CX51x0-N010 DV
CX51x0-N011 DisplayPort, additional DisplayPort for clone and extended display mode
CX51x0-N020 Audio interface, 3 x 3.5 mm jack plug, Line-In, Mic-In, Line-Out
CX51x0-N030 RS232, D-sub connector, 9-pin.
CX51x0-N031 RS422/RS485, D-sub socket, 9-pin.
CX51x0-B110 EtherCAT slave, EtherCAT IN and OUT (2 x RJ45)
CX51x0-M310 PROFIBUS master, D-sub socket, 9-pin
CX51x0-B310 PROFIBUS slave, D-sub socket, 9-pin
CX51x0-M510 CANopen master, D-sub connector, 9-pin
CX51x0-B510 CANopen slave, D-sub connector, 9-pin.
CX51x0-M930 PROFINET RT, controller, Ethernet (2 x RJ-45).
CX51x0-B930 PROFINET RT, device, Ethernet (2 x RJ-45 switch).
Only available for CX5130 and CX5140.
Power supply terminal
The power supply terminal for the Embedded PC is located on the right-hand side. Bus Terminals (K-bus) or EtherCAT Terminals (E-bus) can be attached on the right-hand side of the power supply unit. The power supply terminal automatically recognizes the respective bus system (K-bus or E-bus).
Software
In combination with the TwinCAT automation software, the CX51x0 Embedded PC becomes a powerful IEC61131-3 PLC with up to four user tasks.
Additionally, Motion Control tasks can also be executed. It may be possible to control several servo axes, depending on the required sampling time. In addition to simple point-to-point movements, it is possible to execute more complex multi-axis functions such as electronic gear unit, cam plate, and flying saw.
In addition to real-time execution of control tasks, the TwinCAT real-time kernel ensures that enough time remains for the user interface (HMI) to communicate with the real-time components via software interfaces such as ADS or OPC.
CX5130-0100
CX5130-0110
CX5130-0111
CX5130-0112
CX5130
CX5130-0113
CX5130-0115
CX5130-0120
CX5130-0121
CX5130-0122
CX5130-0123
CX5130-0125
CX5130-0130
CX5130-0135
CX5130-0140
CX5130-0141
CX5130-0142
CX5130-0150
CX5130-0155
CX5130-0160
CX5130-0161
CX5130-0162CX5130-0163
CX5130-0170
CX5130-0175
CX5130-0185
